|
Description:
|
SunStone®
finishes are blends of specially selected quartz and other aggregates,
fortified white Portland cement and Colored Quartz Aggregate accents. SunStone®
provides the proven durability of exposed aggregate finishes as an
alternative to traditional pool plaster. SunStone's® variety
in color and texture offers the customer almost limitless flexibility
in poolscape design. Ideal for residential or commercial projects,
SunStone® is easily installed but intended for use by professional
applicators. |
|
Benefits:
|
-
Proven durability
- Extremely etch resistant
- High compressive strength
- Colored Quartz Aggregate
- Traditionally or spray applied
- Ease of maintenance |
|
Preparation:
|
SunStone®
should be applied to a sound surface free of oil, dirt, algae or any
other foreign substance. Previously applied paints or sealers must
be removed by acid washing and/or sandblasting. Neutralize acid with
baking soda or soda ash then thoroughly rinse with water. In addition
to, or in partial replacement of, the procedures mentioned above,
CLI PermaKote™® can be used as a bonding coat. Re-finished
pools must be undercut an appropriate distance around all tile, return
lines, light fixtures and main drains. All weepers and plumbing leaks
should be repaired at least 24 hours prior to plaster application. |
|
Mixing:
|
1.
Using standard mixing equipment, it is important to blend each batch
for the same amount of time.
2. Mix SunStone® with approximately 1 1/2 to 1 3/4 gallons of potable
water per 80-lb. bag.
3. Start the mixing procedure by adding approximately 2/3 of the total
water requirements to the mixer, add the SunStone® and
then add the balance of the water.
4. Mix the completed batch for at least 8 minutes to ensure a proper
|
|
Application:
|
SunStone®
may be applied by either spray or conventional methods. Apply SunStone®
over a lightly dampened (no standing water) surface to a uniform thickness
of approximately 3/8." Substrate conditions will have a direct
relationship on the thickness of application and coverage rates per
bag. If application must be interrupted, finish to a natural break
to prevent joints from showing. SunStone® should be applied
in temperatures exceeding 40†F. |
|
Curing:
|
Care
should be taken to protect SunStone® from rapid drying
conditions such as high wind, high temperature, low humidity. Such
precautions may include fogging or misting the surface or placing
a protective covering over the pool. Cover should not be placed on
the plaster surface. |
|
Filling
Procedures:
|
When
filling a pool it is important to do so without interruption of fill
water. Fill pool as rapidly as possible. All fill hoses should have
a sock or cloth on the end. Do not allow main hose length to lay on
the plaster surface, as it will leave a mark. |
|
Water
Chemistry:
|
The
pool water must be carefully balanced from the initial fill and constantly
maintained within NSPI recommended guidelines. Maintaining proper
chemical balance from first fill is essential to maximize the life
of the pool surface. Please consult your CLI Product Service Representative
or your SunStone® warranty card concerning start-up techniques and
maintenance programs. |
|
Coverage:
|
Each
80-lb. bag covers approximately 20-25 sq. feet at 3/8" thickness.
Coverage rates may vary depending on method of application and condition
of substrate |
|
Packaging:
|
SunStone®
is packaged in 80-lb. heavy-duty poly-lined bags. |